Hauthane HD-2503 DMM
- CASE Ingredients Features
- Excellent WeatherabilityGood Hydrolysis ResistanceHigh DurabilityOxidation ResistantUV Resistance
- Chemical Family
- Polyurethanes (PU)
Hauthane HD-2503 DMM is a polycarbonate-based, aliphatic waterborne polyurethane dispersion.
Properties
- Physical Form
- Dispersion
Identification
- CASE Ingredients Functions
- Binder & Resin
Product families
Applications
- Metal Coatings
Product Families
- Polyurethanes (PU)
Other characteristics
- Brand
- Hauthane
- End Uses
- Waterborne Coating
- Features
Excellent Weatherability, Good Hydrolysis Resistance, High Durability, Oxidation Resistant, UV Resistance
- Compatible Substrates & Surfaces
- Metal, Plastics, Wood
- Curing
Typical oven drying temperatures and dwell times for aqueous coatings are sufficient to produce optimal film properties.. Enhanced film properties can be obtained when this product is crosslinked with any of a variety of external crosslinking agents.
- Carrier
- Dipropylene Glycol Dimethyl Ether (DMM)
- Water
- Markets
- Paints & Coatings
- Technology
- CASE Ingredients
- Suggested Uses
Hauthane HD-2503 DMM was developed for general coatings use on wood, plastic and metal substrates.; The product offers exceptional resistance to hydrolysis, oxidation and UV-degradation.; Hauthane HD-2503 DMM is ideally suited for exterior applications where film durability and longevity are important considerations.
- Product Features
Excellent exterior weathering durability; Excellent humidity resistance; Contains dipropylene glycol dimethyl ether (DMM) co-solvent
- Application Methods
- Brush
- Padding
- Spray
- Applications
Hauthane HD-2503 DMM may be formulated into coatings applied by spray, brush or pad applicator.; It can be used as a sole vehicle or blended with acrylic emulsions.; The rheology may be modified with associative thickeners.
- Coating End Applications
- Waterborne Coating
- Compatible Polymers and Resins
- Acrylics
- Compatible Substrates and Surfaces
- Metal
- Plastics
- Wood
Technical data
Table 1 of 2
7 rows| Characteristic | Value | Unit |
|---|---|---|
| Solid Content | 34 - 36 | % |
| Viscosity | 50 - 500 | cPs |
| Density | 1.04 | g/cm³ |
| pH Value | 7.5 -10.0 | — |
| Volatile Organic Compound (as supplied) | 100.0 | gm/l |
| Volatile Organic Compound (less water) | 240.0 | gm/l |
| Softening Point | 355.0 | °F |
Table 2 of 2
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Elongation (Tested at 20 Inches/minute) | 210.0 | % |
| Tensile Strengh (Tested at 20 Inches/minute) | 6825.0 | psi |
| 100% Modulus (Tested at 20 Inches/minute) | 4700.0 | psi |
| 200% Modulus (Tested at 20 Inches/minute) | 6600.0 | psi |
| 300% Modulus (Tested at 20 Inches/minute) | NA | — |
