Everprime Bleed Block SS
- Chemical Family
- Acrylics & Acrylates
Everprime Bleed Block SS is water resistant acrylic base coat for smooth asphalt surfaces.
Product families
- Base Coats & Undercoats
Other characteristics
- Brand
- Everprime
- Features
Bleed Resistant, Breathable, Consistent High Quality, Excellent Substrate Adhesion, Good Color Stability, Good Smoothness, Good Weather Stability, Water Resistant
- Product Type
1K (1 component) Coating, Base Coat, Elastomeric Coating, Waterborne Coating; 1K (1 component) Coating; Base Coat; Elastomeric Coating; Waterborne Coating
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Asphalt, Metal, Wood
- Markets
- Building & Construction
- Paints & Coatings
- Technology
- Ready-to-Use Products
- Packaging Type
- Drums
- Pails
- Labeling Claims
- Plasticizer-free
- Recommended Uses
Everprime Bleed Block SS Base is designed as a base coat for application over smooth surface asphalt such as built up and modified bitumen substrates. Everprime Bleed Block SS may be used in low areas and waterways when used in combination with reinforcing fabric. With a suitable top coat, it is an exceptional protective system for asphaltic membranes. Check with your Everest representative for top coat recommendations.
Technical data
Table 1 of 1
12 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength | 75 - 125 | PSI | ASTM D-2370 |
| Elongation | 955 - 1005 | % | ASTM D-370 |
| Perms | 3.0 | — | ASTM D-1653 |
| Solids Content by Weight | 63 - 67 | % | ASTM D-370 |
| Solids Content by Volume | 48 - 52 | % | ASTM D-1644 |
| Density | 11.4 | lbs/gal | ASTM D-370 |
| VOC | max. 50 | g/L | EPA Method 24 |
| Flash Point | min. 212 | °F | ASTM D-1310 |
| Temperature Limit | 0 to 185 | °F | — |
| Low Temperature Flexibility ( 180°F Flex over 1/8 Mandrel at 0°F) | Passes | — | ASTM D-522 |
| Cure Time (Depending on Temperature & Humidity) | 24 | Hours | — |
| Dry Time (75°F at 50% m) | 5 | Hours | — |
