BioGrease HDS 2 BG32004
- Chemical Family
- Lithium Complexes
BioGrease HDS 2 BG32004 is a biodegradable, minimally toxic, synthetic lithium complex grease formulated to provide high film strength, withstand high operating temperatures, and maintain excellent stability. BioGrease HDS 2 BG32004 features a high viscosity base oil for high load carrying capabilities. BioGrease HDS 2 BG32004 is formulated featuring our proprietary eSyn™ technology.
Product families
Applications
- Equipment & Parts
- Marine Fluids & Lubricants
Product Families
- Greases
Other characteristics
- Brand
- BioGrease
- Features
Biodegradable, Good Stability, High Film Stiffness, High Temperature Strength, Tacky, Wash-Off Resistance, Wear Resistant
- Product Type
- Grease
- Thickener Type
- Lithium Complex
- Markets
- Automotive & Transportation
- Industrial
- Approvals
USDA biopreferred program.. Classified as Environmentally Acceptable Lubricants (EAL's) as per the EPA's guidance document that defines standards for Environmentally Acceptable Lubricants (EPA 800-R-11- 002) and as required by EPA's 2013 U.S. Vessel General Permit (VGP).
- PACKAGING
- Drum – 400 lb.
- Keg – 120 lb.
- Pail – 35 lb.
- Tube – 14 oz.
- Technology
- Ready-to-Use Products
- Packaging Type
- Drums
- Pails
- Labeling Claims
- Low Toxicity
- Benefits and Features
- Excellent anti-wear.
- Enhanced water washout properties.
- High temperature stability.
- Minimally Toxic.
- Not Bioaccumlative.
- Readily Biodegradable.
- Certifications and Compliance
- EPA Registered
- USDA BioPreferred
- Ready to Use Product Features
- Biodegradable
- Good Stability
- High Film Stiffness
- High Temperature Strength
- Tacky
- Wash-Off Resistance
- Wear Resistant
Technical data
Table 1 of 1
20 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Base Oil Type | Synthetic Ester | — | ISO 220 |
| Appearence | Tacky | — | — |
| Worked Penetration (60 Strokes) | 265 - 295 | — | ASTM D217 |
| Dropping Point | 255.0 | °C | ASTM D225 |
| Base Fluid Viscosity (40°C) | 195.7 | cSt | ASTM D445 |
| 4 Ball Weld | 400.0 | Kg | ASTM D2596 |
| 4 Ball Wear (Scar Dia) | 0.59 | mm | ASTM D2266 |
| Water Washout (79°C) | 4.2 | % Loss | ASTM D1264 |
| Water Sprayoff | 13.6 | % Loss | ASTM D4049 |
| Roll Stability | +8 | Pts Change | ASTM D1831 |
| Water Stability (After Shell Roll) | +31 | Pts Change | ASTM D7342 |
| Copper Corrosion | 1B | — | ASTM D4048 |
