SYNTHOESTER 1080
- CASE Ingredients Features
- Chemical Resistance
- Chemical Family
- Polyesters
SYNTHOESTER 1080 is a highly branched, saturated polyester containing hydroxyl groups.
Identification
- CASE Ingredients Functions
- Binder & Resin
Product families
Applications
- Consumer Goods — Other Consumer Goods Applications; Consumer Goods — Stationery; Art & Office Supplies
- Craft & Hobby
- Other Consumer Applications
- Industrial Coatings
- Metal Coatings
Product Families
- Polyesters
Other characteristics
- Brand
- SYNTHOESTER
- End Uses
E-Coat & Electrodeposition, Solventless & High Solids Coating
- Features
- Chemical Resistance
- Compatible Substrates & Surfaces
- Metal, Plastics
- Markets
- Adhesives & Sealants
- Consumer Goods
- Paints & Coatings
- Storage
In closed containers, protected from moisture, unlimited shelf-life.
- Cure
- Chemical Cure
- Supplied As
- 85% in methoxy propyl acetate
- Coating Type
- E-Coat & Electrodeposition
- Solventless & High Solids Coating
- Dilutability
Synthoester 1080 special can be diluted in any proportion with esters, ketones and glycol ether esters. Aromatic compounds can be incorporated in small amounts as extenders. It is important to take care that only anhydrous solvents and solvents that do not contain any hydroxyl groups are used.
- Pigmentation
All neutral pigments and fillers are suitable for pigmentation. Basic pigments and pigments containing soluble metallic compounds may exert a catalytic effect on curing and shorten the pot life of finished mixed batches.
- Technology
- CASE Ingredients
- Compatibility
Synthoester 1080 is compatible with the polyisocyanates Desmodur L, VL, IL and N. It is also compatible with the Synhtoesters 1018, 1065, 1120, 1130, and 1165 and 1065 special.
- Compatible Polymers and Resins
- Nitrocellulose
- Properties and Fields of use
In combination with aromatic polyisocyanates air- and stove-drying two-component coatings that give hard films with a high resistance to chemicals.
- Compatible Substrates and Surfaces
- Metal
- Plastics
- Mixing ratio with poly-isocyanates
Assuming equivalent reaction of the reactive groups (NCO:OH = 1:1), the following formula applies for the calculation of the amount of polyisocyanate to be added (relative to 100 parts by weight of solid Synthoester 1080): Amount of 42 X 100 x 8,8 polyisocyanate = ------------------ to be added 17 x NCO % 42 = molecular weight of the NCO group 17 = molecular weight of the OH group 8.8 = hydroxyl content of Synthoester 1080 in % relative to non-vol. components Best results are obtain with a mixing ratio of: 100 parts by weight SYNTHOESTER 1080 with 190 parts by weight Desmodur L - 67%.
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Viscosity | 1.200-1.600 | mPas | AV-F-V005 |
| Acid Value | 85 | % | AV-F-S001 |
| Color Value (Iodine) | Max. 5 | — | — |
| Density | 1.141 | g/ml | AV-F-0D001 |
| Flash point | 64 | °C | AV-F-f006 |
| Hydroxyl Content | 280-320 | % | Relative to NVC |
| Hydroxyl Content | approx. 8.8 | % | AV-F-H003 |
| Non Volatile Content | 85±1 | % | AV-F-F003 |
