SYNTHALAT W 46

Name: SYNTHALAT W 46
Brand: SYNTHALAT

SYNTHALAT W 46 is a water-dilutable specially modified alkyd resin.

Product families

Paints & Coatings — Automotive & Transportation

Automotive & Transportation — Coatings & Finishes

Paints & Coatings — Industrial Coatings

Automotive & Transportation — Transportation

CASE Ingredients — Resins & Binders

Brand: SYNTHALAT
End Uses: Top Coat
Compatible Substrates & Surfaces: Metal
Usage: For water-dilutable priming and top coat paints with good drying; in addition fast initial water resistance.
Carrier: Water
Markets: Automotive & Transportation
Paints & Coatings
Appearance: Opaque
Composition: Oil Type: drying fatty acid Oil content: approx. 46 %
Cure: Chemical Cure
Supplied As: 40 % in butyl glykol/ammonia/water (7 : 2,5 : 50,5)
Coating Type: Top Coat
Technology: CASE Ingredients
Film Properties and Processing: Appropriately formulated paints have a good body and exceptionally high gloss and content less than 5% solvents. The priming and top coat paints are resistant to rain, mist and high atmospheric humidity both after forced drying of e.g. 15 min/85°C and after 24 h room temperature. These paints are used for agricultural machinery and general industry. For Synthalat W46 we recommend drier combination as follows: 0,05 – 0,15% Co + 0,05-0,15% Mn for primers and colored systems 0,05%Co, 0,1% Ca, 0,1-0,6% Zr for white pigmented systems (relative to metal content on solids) We recommend the use of water emulsified driers, incorporation should take place in mill base. Use of basic anti-corrosive pigments is not recommended, compatibility with certain anticorrosive pigments should be tested.
Compatible Substrates and Surfaces: Metal

5 rows

Characteristic	Value	Unit	Method
Viscosity	1.000-4.000	mPas	AV-F-V005
Density	approx. 1.013	g/ml	AV-F-0D001
Flash point	approx. 62	°C	AV-F-f006
Non Volatile Content	40	w %	AV-F-F003
pH-value	8.0-9.0	—	AV-F-P001