SPILL-SORB™
SPILL-SORB™ contains, controls, and picks up unwanted liquid spills, and remove sheen from floors, work surfaces, driveways, etc. SPILL-SORB™ is made from 100% reclaimed cellulose fiber and absorbs liquids ranging from oil and solvents to water and non-aggressive chemicals on contact.
Product families
Applications
- Other Industrial Applications
- Surface Care
- Industrial Cleaning
Product Families
- Ready-to-Use Products — Other Ready-to-Use Products
- Commercial Cleaners
- Industrial Cleaners
Other characteristics
- Brand
- SPILL-SORB
- Product Type
- Absorbent
- Application Area
- Equipment, Floor
- Equipment
- Floor
- Markets
- HI&I Care
- Industrial
- Technology
- Ready-to-Use Products
- Packaging Type
- Bags
- HIGHLIGHTS
Through capillary action, the absorbed liquid is locked into the cellulose fiber, preventing leaching and handling problems common with clay and diatomaceous earth (DE). Our cellulose fibers contain no respirable crystalline silica dust ( a known cause of silicosis and a probable carcinogen) which is common with most mineral sorbents. The superior performance of Spill-Sorb makes it ideal for the consumer, commercial and industrial user.; Spill-Sorb is the preferred alternative to clay and diatomaceous earth.; Spill-Sorb was formulated to address many of the environmental, usage and disposal issues associated with traditional clay floor absorbents. Clay absorbents are commonly used across the country in factories, shops and homes for spill solidification. Clay absorbents are marked with an OSHA warning label due to health concerns associated with their airborne silica. Clay products are open-pit mined and have a low absorption ratio (less than 1 to 1). Clay products can not be incinerated. Spill-Sorb addresses all of these concerns with a safe, recycled, incinerable product that absorbs 3 times its weight.
- Background Information
Spill-Sorb is a recycled cellulose-based particulate engineered as a clay-based, oil-absorption replacement.; The product works using the natural high absorption and holding powers of cellulose fibers.; Spill-Sorb particulate is a universal absorbent for a wide range of non-corrosive liquids.; Spill Sorb has a 3 to1 absorption ratio by weight on most liquids.; Spill-Sorb is incinerable with positive BTU value.; Spill-Sorb will neutralize common battery acid at a 1 to 4 acid-to-absorbent-application rate (dilute acid 5 to 1 with water prior to adding absorbent).; Spill-Sorb is non-abrasive as it does not have the coarse / parts-wearing silica granules found in clay products.; Spill-Sorb reduces disposal costs as it takes less product to absorb more liquids
- Ready to Use Product Features
- Non Abrasive
