STYACRYL V500

Properties

Physical Form

• Emulsion
• Liquid

Product families

Other characteristics

Brand

STYACRYL

End Uses

Primer, Solventborne Coating

Glass Transition Temperature (Tg)

12.0 - 12.0 °C

Usage

The usual titanium dioxide and colored pigments as well as fillers or extenders are used for the formulation of paints. To ensure adequate storage stability long-term storage trials are recommended at any rate, especially when fillers and colored pigments with a large specific surface area are chosen. In addition to the widespread used polyphosphates the salts of low molecular weight polyacrylic acids working as dispersing agents should also be used to achieve further stability.

Show in full

Markets

• Paints & Coatings
• Printing & Packaging

Appearance

Soft, Flexible, Clear and Tack free

Coating Type

• Primer
• Solventborne Coating

Technology

CASE Ingredients

General Features

Styacryl V500 is raw material for the paints and coating industry. Including: Δ; Interior paints, flat to semi-gloss; Primers; Textured coatings; With medium pigment volume concentrations, it is universal copolymer emulsion for solvent-based interior coatings.

Preservation

The dispersion contains some initial preservatives to prevent attack by microorganisms. In order that the product sufficiently protected against microbial contamination during further storage in opened drums, tanks or other storage facilities a suitable preservative should be add it despite our preliminary preservation measures and the tanks and pipe work should be kept adequately clean. Styacryl V 500 has minimum shelf life of 6 months from the dispatch date, provided the product is at temperatures between 5 °C and 35° C, avoiding frost and direct sunlight. Furthermore, it must be ensured that already opened drums and containers are always tightly closed. For bulk storage, additional conditions like the addition of preservatives or frequent stirring are technically applicable and recommended. To remove any skins or lumps that could been formed during longer storage of the dispersion due to its film forming nature a filtration or sieve process is recommendable before further processing. The technical data ascertained by our quality control laboratory at the time of product release may vary according to the storage time and storage conditions and may deviate from the original values.

Show in full

Environmental Protection

The usual protective measures employed during the handling of aqueous polymer emulsions should observed.