To catalogue
Polifil® 627L
- Chemical Family
- Polyamides
Polifil® 627L combines good abrasion and chemical resistance. These properties have been proven to work in the following applications: valves, bearings and bearing cases. Standard processing techniques are applicable. Use this information as a guide to aid you in selecting the proper resin for your application. TPG will custom compound and fine-tune our formulations for your application.
Properties
- Physical Form
- Pellets
- Solid
Product families
Applications
Agriculture & Feed — Agricultural Films
- Pipes & Hoses
Automotive & Transportation — Automotive
- Other Automotive Applications
Building & Construction — Building Materials
- Pipes & Plumbing
Industrial — Chemical & Industrial Manufacturing
- Other Industrial Applications
Product Families
Plastics — Engineering & Specialty Polymers
- Polyamides
Other characteristics
- Brand
- Polifil
- Polymer Name
- Polyamide 66 (PA 66)
- Markets
- Agriculture & Feed
- Automotive & Transportation
- Building & Construction
- Industrial
- Technology
- Plastics
- Material Features
- Chemical Resistant
- Good Abrasion Resistance
- Chemical Inventories
- TSCA (USA)
- Usage
Use this information as a guide to aid you in selecting the proper resin for your application. TPG will custom compound and fine-tune our formulations for your application.
- Certifications and Compliance
- REACH (Europe)
- RoHS 2 Compliant
- RoHS 3 Compliant
- RoHS Compliant
- Plastics and Elastomers End Uses
- Bearings
- Valves
- Plastics and Elastomers Functions
- Resin
Technical data
Table 1 of 3
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Reinforcement content | 0 | % | TPG WI |
| Specific gravity | 1.08 | — | D 792 |
| Melt flow | n/a | g/10 min | D 1238 |
| Water absorption, 24 hours | 1.3 | % | D 570 |
| Mold shrinkage – 1/8˝ specimen | 0.015 | in/in | D 955 |
Table 2 of 3
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Rockwell hardness | 105 | Scale R | D 785 |
| Tensile strength | 6800 | psi | D 638 |
| Tensile modulus | 260 | kpsi | D 638 |
| Flexural modulus, tangent | 248 | kpsi | D 790 |
| Flexural strength | 7800 | psi | D 790 |
| Izod impact, notched | 16 | ft-lbs/in | D 256 |
| Gardner impact, 1/2˝ tup | min. 200 | in-lbs | D 5420 |
| Elongation (Break) | 80 | % | D 638 |
| Elongation (Yield) | 7 | % | D 638 |
Table 3 of 3
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Deflection temperature, 66psi | 400 | ˚F | D 648 |
| Deflection temperature, 264psi | 140 | ˚F | D 648 |
