AmCoat Industries RHINO RUST BOND
- Chemical Family
- Epoxy & Epoxy Derivatives
AmCoat Industries Rhino Rust Bond is a 100% solids epoxy primer designed to prime and encapsulate rusted metal surfaces. This 100% solids two component epoxy seals out air and moisture from the surface while providing a strong bond to ferrous metal surfaces. RHINO RUST BOND is a great alternative when sand blasting is not practical or cost effective. RUST BOND doesn't shrink resulting in very low surface tension, high spread rates, and great edge retention for metal edges and corners. This primer is typically used as part of two or three coat system utilizing RHINO URETHANE as the protective finish coat.
Product families
Applications
- Architectural Coatings
- Decorative Paints Coatings & Stains
- Floor Coatings
- Industrial Coatings
Product Families
- Primers & Sealers
Other characteristics
- Features
Corrosion Resistant, Cost Effective, Excellent Seal Properties, Excellent Substrate Adhesion, Good Moisture Resistance, High Solids Content, Non-Toxic
- Product Type
2K (2 component) Coating, Epoxy Coating, Primer, Solventless & High Solids Coating, Waterborne Coating; 2K (2 component) Coating; Epoxy Coating; Primer; Solventless & High Solids Coating; Waterborne Coating
- Application Area
- Containers, Pipes, Tanks
- Containers
- Pipes
- Tanks
- Compatible Substrates & Surfaces
- Iron, Metal, Steel
- Usage
RHINO RUST BOND provides exceptional adhesion to rusted, aged and corroded surfaces.; Specifically designed for metal and rust when blasting is not practical nor economically justified.; The priming system seals and unifies the substrate surface providing a paintable surface.; RHINO RUST BOND have commercial and industrial applications.; It can be used on roofs, rust, walls and numerous metal surfaces.; Accepts most topcoats.
- Markets
- Building & Construction
- Paints & Coatings
- Benefits
- Great adhesion
- Encapsulates rust
- Low surface tension curing
- Cost effective
- Great alternative to white metal sand blasting
- PACKAGING
- Available in 2 and 10 Gallon kits.
- Technology
- Ready-to-Use Products
- Vehicle Type
- Epoxy/Amine
- Labeling Claims
- Non-Toxic
- Ready to Use Product Features
- Corrosion Resistant
- Cost Effective
- Excellent Seal Properties
- Excellent Substrate Adhesion
- Good Moisture Resistance
- High Solids Content
- Non-Toxic
- Compatible Substrates and Surfaces
- Iron
- Metal
- Steel
Technical data
Table 1 of 1
10 rows| Characteristic | Value | Unit |
|---|---|---|
| Solids (Weight) | 100.0 | % |
| Solids (Volume) | 100.0 | % |
| Weight | 8.7 - 9.1 | lbs |
| VOC (Average) | Zero | g/Liter |
| Spread Rate | 500 - 600 | sq.ft/Gal |
| Recoat | min. 12 | — |
| Accelerated Weathering | No Change (No, Cracking, Peeling, Softening) | G154 |
| Moisture Resistance | No Change (No Fading, Blistering, Cracking, Delamination, Softening) | D4585 |
| Salt Tolerance | Rated 10 (Best) | B117 |
| Corrosion Scribed Test | Rated 10 (Best, No Mean Creepage) | D1654 |
