Innovoh® Calcium Hydroxides
Innovoh® Calcium Hydroxides is a powder consisting of ultra-fine particles of calcium hydroxide, which gives excellent mixing and dispersion characteristics. Calcium hydroxide is used as a cure additive and acid scavenger in bisphenol cured FKM fluoroelastomers. It is not used in peroxide cured systems. Acid scavenging capacity is particularly useful in systems containing chlorine or fluorine. Calcium hydroxide will react with any free hydrochloric or hydrofluoric acid to neutralize the acid and prevent any corrosive impact on metal parts. Innovoh contains high quality, ultra-fine calcium hydroxide which is extremely consistent in its performance. Innovoh powders contain 100% calcium hydroxide powder.
Properties
- Physical Form
- Powder
- Solid
Product families
Applications
- Pipes & Plumbing
- Equipment & Parts
- Other Industrial Applications
Product Families
- Performance Additives
Other characteristics
- Brand
- Innovoh
- End Uses
- Gaskets, Hoses
- Functions
- Acid Scavenger, Curing Agent
- Compatible Polymers & Resins
- Fluoroelastomer (FKM)
- Markets
- Building & Construction
- Industrial
- Storage
Innovoh must be stored inside, in clean dry conditions and unopened packaging. If stored correctly, Innovoh has a minimum shelf life of 12 months from date of production, or 24 months if supplied in HDPE Pouches.
- Addition
- Typical dose rate for Innovoh would be 5 phr.
- PACKAGING
Innovoh is available in 1kg low melt EVA sachets which can be put directly into the mixer, or 1kg resealable HDPE pouches Other pack sizes and packaging types available on request.
- Dispersion
In tests conducted by Artis, Innovoh shows exceptional dispersion in use, giving consistent results and high quality finished product from SEM. The same tests show that competitor products are not as well dispersed and contain much larger particles, so consistency of results is much lower.
- Technology
- Elastomers
- Packaging Type
- Sachets
- Material Features
- Consistent High Quality
- Excellent Dispersibility
- Certifications and Compliance
- EC No.1907/2006
- ISO 14001
- ISO 45001
- ISO 9001
- OHSAS
- REACH (Europe)
- Regulation (EU) No. 1272/2008
- Compatible Polymers and Resins
- Fluoroelastomer (FKM)
- Plastics and Elastomers End Uses
- Gaskets
- Hoses
- Plastics and Elastomers Functions
- Acid Scavenger
- Curing Agent
Technical data
Table 1 of 1
5 rows| Characteristic | Value | Unit |
|---|---|---|
| PSD Typical - D50 | 2.4 | microns |
| PSD Typical - D90 | 4.9 | microns |
| Low Melt Sachet - Melting Point | 70 - 80 | °C |
| Calcium hydroxide | 100.0 | wt% |
| Dispersion Aid | 0.0 | wt% |
