SAFE-T-GRIP® 1:1
Safe-T-Grip® 1:1 and Safe-T-Grip 2-1 epoxy overlay systems are two-component, epoxy hybrid/amine-cured polymers designed for use with aggregate as a tough, durable, skid-resistant, high-friction bonded epoxy overlay. Both systems are formulated for use in bike and bus lanes or as a high-friction surface treatment (HFST).
Product families
Applications
- Coatings & Markings
Product Families
- Other Paints & Coatings
Other characteristics
- Brand
- SAFE-T-GRIP
- Features
Durable, Excellent Toughness, Good Adhesion, Good Flexibility, Low Temperature Flexibility, Skid Resistant
- Product Type
2K (2 component) Coating, Epoxy Coating, Solventless & High Solids Coating; 2K (2 component) Coating; Epoxy Coating; Solventless & High Solids Coating
- Compatible Substrates & Surfaces
- Asphalt, Concrete
- Color
- Green
- Red
- Markets
- Building & Construction
- PACKAGING
Component A: Epoxy Resin Component B: Amine Both components are available in 5 gallon pails, 55 gallon drums and 250 gallon totes
- Technology
- Ready-to-Use Products
- Packaging Type
- Drums
- Pails
- Totes (IBC)
- Advantages
• 100% solids chemistry • Epoxy chemistry maintains flexibility in cold and after aging • Long-term high friction characteristics • Excellent bond strength assures good adhesion to the substrate • Special formulation chemistry for faster set at a wide range of temperatures • Specified aggregate provides and maintains excellent skid resistance • Low viscosity and 1:1 mix ratio for easy application
- Storage Condition
Store both components of Safe-T-Grip 1:1 in a dry area. Avoid excessive heat and do not freeze. The shelf life is two years in the original unopened container. Prior to use material should be conditioned to 65-85ᵒF.
- Ready to Use Product Features
- Durable
- Excellent Toughness
- Good Adhesion
- Good Flexibility
- Low Temperature Flexibility
- Skid Resistant
- Compatible Substrates and Surfaces
- Asphalt
- Concrete
Technical data
Table 1 of 1
13 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Percent Solids | 100.0 | % | — |
| Viscosity | 1250.0 | cP | ASTM D-2196 |
| Gel Time ( 77°F/25°C) | 15.0 | minutes | ASTM D-2471 |
| Cure Time ( 77F/25 °C) | 2.5 | hours | — |
| Adhesion (100% concrete failure) | min. 300 | psi | ASTM D-7234 |
| Hardness | 70.0 | Shore D | ASTM D-2240 |
| Tensile Strength | 2900.0 | psi | ASTM D-638 |
| Elongation | 100.0 | % | ASTM D-638 |
| Water Absorption ( 24 hour) | 0.6 | % | ASTM D-570 |
| Liquid Binder Coverage | 0.36 | gallons/sq | — |
| Aggregate Coverage | 15-18 | lb/sq yard | — |
| Compressive Strength (Mortar, After 3 hours ) | 1700.0 | psi | ASTM C-579 |
