New Tech Lubes FS Dura Tech
New Tech Lubes FS Dura Tech is a product, which uses the latest grease technology and technical developments to deliver high performance under the most extreme conditions of load and temperature. Dura-Tech is a perfluoroether, the highest quality available of all PFPE greases. H1 registered for use in food, pharmaceutical and clean environments.
Product families
Applications
- Equipment & Parts
Product Families
- Greases
Other characteristics
- Features
Chemical Resistant, Corrosion Resistant, Excellent Mechanical Strength, High Temperature Resistance, Non-Toxic
- Product Type
- Grease
- Thickener Type
- Perfluoropolyether (PFPE)
- Application Area
- Slides
- Compatible Substrates & Surfaces
- Elastomers & Rubbers, Plastics
- Markets
- Industrial
- Technology
- Ready-to-Use Products
- Packaging Type
- Cartridges
- Labeling Claims
- Non-Toxic
- Typical Applications
Particularly good for the lubrication of plastics and elastomers.; Lubrication of bearings slides and pivot points under conditions of high load and continuous high temperature.; Critical Applications such as medical equipment and diving valves.; The nature of Dura-Tech allows it to be used in harsh chemical environments, vacuum and oxygen rich environments
- Benefits and Features
Provides lubrication from -25°C – 300°C; Compatible with most materials; Resistant to aggressive chemicals; Non-toxic and environmentally friendly; Compatible in human biology; Safe for use in oxygen rich environments; Is compatible with all plastics; Very low coefficient of friction; InS H1 Registered, made with FDA listed ingredients
- Available Sizes & Grades
- Sizes
- 1kg Pot, 800g Cartridge
- Grades
- 2
- Certifications and Compliance
- FDA Compliant
- Ready to Use Product Features
- Chemical Resistant
- Corrosion Resistant
- Excellent Mechanical Strength
- High Temperature Resistance
- Non-Toxic
- Compatible Substrates and Surfaces
- Elastomers & Rubbers
- Plastics
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 1900.0 | kg/m3 | — |
| Dropping Point | min. 300 | °C | — |
| Gel Point | -25.0 | °C | — |
| Kinematic Viscosity (40°C) | 420.0 | mm2/s | ASTM D445 |
| Primary Decomposition Temp | 320.0 | °C | — |
| Surface Tension | 24.0 | dynes/cm | — |
| Temperature Range | -25 to 300 | °C | — |
| Unworked Penetration | 265.0 | — | ASTM D217 |
