Toynol® MW-910H
- Chemical Family
- Alcohols, Diols, SiloxanesAlcoholsDiolsSiloxanes
Toynol® MW-910H defoamer is a kind of siloxane and acetylenic diol compounded defoamer, mainly used in emulsified oils (mineral oil based), semi-synthetic fluid and synthetic liquid, providing quick defoaming, long-lasting antifoaming without floating oil and floc. This series of defoaming agent shows excellent rinsing property in industrial cleaning /rinse and spraying process without flaw after rinsing.
Properties
- Physical Form
- Liquid
Product families
Applications
- Fluids & Lubricants
- Metal Manufacturing & Finishing
Product Families
- Performance Additives
Other characteristics
- Brand
- Toynol
- End Uses
- Metalworking Fluids
- Features
- Foaming Resistant
- Functions
- Defoamer
- Markets
- Industrial
- Storage
This product should be sealed and placed in a dry, cool, wellventilated place at room temperature away from fire source.
- PACKAGING
- 25L/220L drum
- Appearance
- Emulsion Liquid
- Solubility
- Self-dispersing
- Technology
- Fluids & Lubricants
- Packaging Type
- Drums
- Addition Levels
Initial proposal was (according to the formula of weight) between 0.1-0.5wt.%. Optimal concentration levels should be determined by running a ladder study.
- Use Direction
When Keep agitating at least 15-30minutes to mix well. Heat up properly when the viscosity is increasing.; Add Toynol ® surfactants at the last step, especially after other surfactants or polymers so that it can be Dissolve and disperse well in the system.; In order to wet out substance well and against the foam introduced by agitation, it is better to add Toynol ® surfactants earlier than all the dye filling and other solid materials.; Toynol ® is a multifunctional product which can replace one or more additives in the formulations.; Under lower temperature, solidification and crystalline of Toynol ® occur during transportation and storage. Heat it up to its melting point, it would turn back to normal state without any impacts.
- Chemical Composition
- Siloxane / acetylenic diol (nonionic) compound.
- Fluids and Lubricants Type
- Metalworking Fluids
- Recommended Applications
Emulsified oils (mineral oil based) liquid metal processing; Semi-synthetic (high content of mineral oil) liquid metal processing; Semi-synthetic (ester / vegetable oil based) liquid metal processing; Fully synthetic metal working fluids
- Certifications and Compliance
- ISO 9001
- Fluids and Lubricants End Use
- Metalworking Fluids
- Fluids and Lubricants Features
- Foaming Resistant
- Fluids and Lubricants Functions
- Defoamer
Technical data
Table 1 of 1
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Active Content | 80.0 | % |
| pH | 7.5 | — |
