To catalogue

Interlube Corp. Super D

Super D A high powered cleaner-degreaser designed to remove the toughest sludges and films that have built up on surfaces. Super D is a very high powered cleaner-degreaser designed to remove even the toughest sludges, tars, stains, contaminants, oily & greasy films and even varnishcarbon deposits which are built up on surfaces. It is designed for cleaning all metal and many plastic surfaces which are resistant to its high solvency. It is a high volatility cleaner that evaporates rapidly at room temperature to leave very clean, even paintable surfaces.

Properties

Physical Form
  • Powder
  • Solid

Product families

Applications

HI&I Care — Home Care
  • Surface Care
HI&I Care — Institutional & Industrial Care
  • Industrial Cleaning

Product Families

Ready-to-Use Products — Cleaners
  • Industrial Cleaners

Other characteristics

Features

Carbon Deposits Removing, Degreasing, Good Penetration, Grime Cleaning, Stain Removing; Low VOC Formulation; Cleans & Degreases; Leaves No Residue; Removes Sludge, Dirt, & Grime; Removes Tars, Gums, & Greases; Removes Varnish-Carbon Deposits

Product Type
  • Cleaner, Degreasers, Stain Removers
  • Cleaner
  • Degreasers
  • Stain Removers
Compatible Substrates & Surfaces
Metal, Plastics
Danger
Extremely flammable aerosol. Causes serious eye irritation. May cause drowsiness or dizziness. May damage fertility or the unborn child. May cause damage to organs through prolonged or repeated exposure. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Keep away from heat/sparks/open flames/hot surfaces. No smoking. Do not spray on an open flame or other ignition source. Pressurized container: Do not pierce or burn, even after use. Do not breathe gas. Wash thoroughly after handling. Use only outdoors or in a well-ventilated area. Wear protective gloves/protective clothing/ eye protection/face protection. Store in a well-ventilated place. Store locked up. Protect from sunlight. Do not expose to temperatures exceeding 49°C/120°F. Dispose of contents/ container in accordance with local/regional/ national/international regulations.
FIRST AID
IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a poison center/doctor if you feel unwell.
IF IN EYES
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
IF ON SKIN
Wash off with soap and water. Get medical attention if irritation develops and persists. IF SWALLOWED: In the unlikely event of swallowing contact a physician or poison control center. CONTAINS (CAS No.): Acetone (67-64-1), Toluene (108-88-3) and Carbon Dioxide (124-38-9).
Markets
HI&I Care
Direction

Read entire label before using this product. This product is Extremely Flammable. Use of this product may cause a flash fire which may result in injury. Do not spray on hot metal surfaces. Use plastic extension tube to direct spray to exact location. Spray directly onto surface to be cleaned. Allow product to penetrate through grease and grime. Wipe away soils or rinse with a second spray. Wipe or allow to air dry. IMPORTANT: If spilled or sprayed on painted surface, wipe off or wash off immediately

Availability
  • CAN SIZE 20 OZ
  • NET WT. 14 OZ / 397 g
Technology
Ready-to-Use Products
Labeling Claims
  • Low VOC
  • Residues-free
Application Methods
Spray
Ready to Use Product Features
  • Carbon Deposits Removing
  • Degreasing
  • Good Penetration
  • Grime Cleaning
  • Stain Removing
Compatible Substrates and Surfaces
  • Metal
  • Plastics

The Omnichem website uses cookies. By continuing to use the site, you consent to their use in accordance with our Privacy Policy and to the collection of analytics.