To catalogue
Adsee AMP40
Adsee AMP40 is an all-in-one biodegradable adjuvant for crop protection formulations. It is a salt-free amphoteric surfactant, designed to be used as an adjuvant for both in-can and tank-mix applications.
Properties
- Physical Form
- Liquid
Product families
Agriculture & Feed — Pest Control
- Agricultural Pest Control
Other characteristics
- Brand
- Adsee
- Functions
Humectant, Hydrotrope, Solubilizer, Surfactant, Surfactant (Amphoteric)
- Labeling Claims
Biodegradable, Clean Label, Non-Hazardous, Salt-free, Sustainable; Biodegradable; Clean Label; Non-Hazardous; Salt-free; Sustainable
- Notes
Typical Data are based on our own measurements or derived from the literature. They do not constitute part of the delivery specification.
- Markets
- Agriculture & Feed
- Appearance
- Clear liquid
- Soluble In
- Water, Propylene glycol
- Insoluble In
- Ethanol, Low aromatic solvent, Xylene
- Technology
- Agrochemicals
- Dispersible In
- 2 - propanol
- Formulation Type
- Microemulsions
- Oil in Water Emulsions
- Suspension Concentrates
- Tankmix (TM)
- Storage Condition
Adsee AMP40 should always be homogenized before use. Storage above 50°C for prolonged periods may have slight darkening effect in color.
- Chemical Inventories
- ENCS (Japan)
- IECSC (China)
- ISHL (Japan)
- KECI (Korea)
- NZIoC (New Zealand)
- TSCA (USA)
- Agrochemical Functions
- Humectant
- Hydrotrope
- Solubilizer
- Surfactant
- Surfactant (Amphoteric)
- Agrochemicals Features
- Improved Plant Protection
- Improves Penetration
- Low Foaming
- Certifications and Compliance
- REACH (Europe)
Technical data
Table 1 of 4
3 rows| Characteristic | Value | Unit |
|---|---|---|
| Density (at 20°C) | 108 | g/L |
| Pour Point | -8 | °C |
| Viscosity (at 20°C) | max. 100 | mPa.s |
Table 2 of 4
1 row| Characteristic | Value | Unit |
|---|---|---|
| Foaming (after 5 mins) | 0 | ml |
Table 3 of 4
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Foam Height according to Ross-Miles (at 50°C, 0.05%, after 5 mins) | 0 | mm |
| Foam Height according to Ross-Miles (at 50°C, 0.05%, immediately) | 15 | mm |
| Surface Tension (at 0.1 wt%) | 64 | mN/m |
| Surface Tension (at 01 w) | 64 | mN/m |
Table 4 of 4
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Clear Point | -4 | °C | — |
| CMC | 13 | g/L | — |
| Color (20% in water) | max. 500 | — | Hazen |
| pH (20% in water) | 8.5 - 95 | — | — |
| Solid Content | 38 - 42 | % | — |
| Solid Content | 40 | % | — |
| Surface Tension (According to Du Noüy, 25°C, 0.1%) | 64 | mN/m | DIN 53914 |
| Water Content | 61 | % | — |
| Wetting Power (According to Draves, 25°C, 0.1%) | min. 300 | Sec | — |
| Water Uptake (after 48 hrs) | 22 | % | — |
