Redicote E-9
- Chemical Family
- Cationics, Fatty AminesCationicsFatty Amines
Redicote E-9 is a emulsifier for cationic rapid- and medium-setting bitumen emulsions suitable for chip seal (surface dressing), tack coat and open graded cold mix.
Properties
- Physical Form
- Paste
Product families
Applications
- Waterproofing & Weatherproofing
- Pavement Highways Roads & Bridges
Product Families
- Asphalt Additives
Other characteristics
- Brand
- Redicote
- End Uses
Asphalt, Bond Coat, Cationic Rapid Set (CRS) Emulsions, Cold Mix, Penetration Macadam, Seal Coat
- Features
High Viscosity; High emulsion viscosity: Redicote E-9 is a special grade of tallowdiamine designed to produce emulsions of the highest quality. Redicote E-9 has for many years been the standard against which other cationic emulsifiers are judged.; Low use level: 0.15-0.22% is normally sufficient for rapid-set emulsions; Medium viscosity build: The product provides cationic rapid-set emulsions medium viscosity build suitable for a wide range of bitumen sources; Highest viscosity building in CRS-2 emulsions saving binder costs. Good emulsion quality at lower dosage, suitable for polymer modified emulsions and provides good adhesion.; Liquid emulsifier that builds medium viscosity in CRS-2 emulsions; Liquid emulsifier that builds medium viscosity in rapid set emulsions and provides good adhesion; Liquid CRS emulsifier for faster break, provides good adhesion and provides good value for the money; Liquid emulsifier that builds high viscosity in CRS-2 emulsions and also provides faster breaking; Liquid emulsifier that builds medium viscosity in CRS-2 emulsions, gives good quality emulsions and efficient in terms of dosage.; 100% active high viscosity building emulsifier that gives high quality emulsions at low dosage.; 100% active high viscosity building emulsifier that is soluble in acidified water at ambient temperatures
- Functions
- Emulsifier, Surfactant, Surfactant (Cationic)
- Applicable Processes
- Chipseal, Surface Dressing
- Chipseal
- Surface Dressing
- Dosage
- pH 2-4.5, hydrochloric acid
- pH 1-4.5, hydrochloric acid
- Acetic acid may be used
- Markets
- Building & Construction
- Appearance
- Paste
- Technology
- Industrial Additives & Materials
- Packaging Type
- Bulk
- Drums
- Storage Condition
Redicote E-9 may be stored in carbon steel tanks. Bulk storage should be maintained at 45-55°C (113-131°F).. Redicote E-9 contains amines and may cause severe irritation or burns to skin and eyes. Protective goggles and gloves must be worn when handling this product.
- Applications
Products for cationic rapid set emulsions for surface dressing / chipseal primer seal, scrub seal and sand seal, and cationic medium set emulsions for graded aggregate seal
- Industrial Additives End Use
- Asphalt
- Bond Coat
- Cationic Rapid Set (CRS) Emulsions
- Cold Mix
- Penetration Macadam
- Seal Coat
- Industrial Additives Features
- High Viscosity
- Industrial Additives Functions
- Emulsifier
- Surfactant
- Surfactant (Cationic)
Technical data
Table 1 of 2
10 rows| Characteristic | Value | Unit |
|---|---|---|
| Density (at 40°C (104°F)) | 0.84 (7.02) | g/cc (lbs/U.S. gal) |
| Pour Point | 35 | °C |
| Density (at 50°C (122°F)) | 0.83 (6.93) | g/cc (lbs/U.S. gal) |
| Density (at 60°C (140°F)) | 0.82 (6.83) | g/cc (lbs/U.S. gal) |
| Density (at 70°C (158°F)) | 0.81 (6.73) | g/cc (lbs/U.S. gal) |
| Viscosity (at 40°C (104°F)) | 50 | mPa s (cP) |
| Viscosity (at 50°C (122°F)) | 27 | mPa s (cP) |
| Viscosity (at 60°C (140°F)) | 10 | mPa s (cP) |
| Viscosity (at 70°C (158°F)) | 7 | mPa s (cP) |
| Flash Point | 199 | °C |
Table 2 of 2
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Water Content | max. 1 | % | VE 5.022 |
| Amine Value | min. 323 | mg KOH/g | SM 5.005 |
| Iodine Value | 32 - 50 | g I2/100 g | SM 5.005 |
