Redicote E-4880
- Chemical Family
- Cationics, Fatty AminesCationicsFatty Amines
Redicote E-4880 is a cationic super slow setting emulsifier providing extended workability for virgin and recycled cold mixes produced in plant.
Properties
- Physical Form
- Liquid
Product families
Applications
- Infrastructure Roads & Paving
- Coatings & Markings
- Pavement Highways Roads & Bridges
Product Families
- Asphalt Additives
Other characteristics
- Brand
- Redicote
- End Uses
Asphalt, Cationic Slow Set Emulsions, Cold Mix, Prime Coat, Tack Coat
- Features
Easy Handling, Good Cohesion Development, Good Wetting Properties, Improved Workability, Low Viscosity; Cold mix and recycling: Very slow breaking cationic emulsifier for plant produced mixes and Full Depth Reclamation (FDR) with long workability time; Base stabilization: Emulsions made with Redicote E-4880 can be used for base stabilization in combination with cement; Value for the money: Can be used at low dosages (1-1.5%) resulting in high quality emulsions with low settlement passing the cement mixing test; Easy handling: Redicote E-4880 does not contain flammable solvents, has low viscosity, is completely water soluble and dissolves easily in the soap phase; Suitable for tack, prime and dust suppression: Emulsions made with Redicote E-4880 are easy to dilute and can penetrate finely graded aggregate substrates due to their high wetting power; Free of Nonyl phenol ethoxylates (NPEs): Redicote E-4880 does not contain NPEs.; Excellent emulsion quality at lower dosage and can be used without addition of acid in the soap; Non-flammable version of Redicote E-11 E for safer handling; Cationic super stable proven emulsifier that has wider applicability.; Super stable emulsifier providing extended workability FDR, plant produced cold mixes and base stabilization; Faster setting for Cold in-place recycling (CIR) with or without cement. Can be used for many applications.; Water based non-flammable quaternary ammonium emulsifier that can be used as a break retarder.; Non-flammable version of Redicote E-11 for safer handling.; Cationic super stable proven emulsifier that has wider applicability
- Functions
- Emulsifier, Surfactant, Surfactant (Cationic)
- Dosage
- pH 1.5-4.0 hydrochloric acid
- Markets
- Building & Construction
- Paints & Coatings
- Use Levels
- 1 - 1.5%
- Appearance
- Dark liquid
- Technology
- Industrial Additives & Materials
- Packaging Type
- Bulk
- Drums
- Totes (IBC)
- Labeling Claims
- Flammable Solvents-free
- NPE-free
- Solvent-free
- Storage Condition
Redicote E-4880 may be stored in carbon steel or stainless steel tanks. Bulk storage should be maintained at 20-35°C 68-95°F).. Redicote E-4880 is alkaline and may cause severe irritation or burns to skin and eyes. Protective goggles and gloves must be worn when handling this product.
- Industrial Additives End Use
- Asphalt
- Cationic Slow Set Emulsions
- Cold Mix
- Prime Coat
- Tack Coat
- Industrial Additives Features
- Easy Handling
- Good Cohesion Development
- Good Wetting Properties
- Improved Workability
- Low Viscosity
- Industrial Additives Functions
- Emulsifier
- Surfactant
- Surfactant (Cationic)
Technical data
Table 1 of 2
9 rows| Characteristic | Value | Unit |
|---|---|---|
| Density (at 20°C (68°F)) | 1.10 (9.16) | g/cc (lbs/U.S. gal) |
| Pour Point | -8 | °C |
| Density (at 30°C (86°F)) | 1.09 (9.11) | g/cc (lbs/U.S. gal) |
| Density (at 40°C (104°F)) | 1.08 (9.05) | g/cc (lbs/U.S. gal) |
| Viscosity (at 20°C) | 1200 | mPa.s |
| Viscosity (at 20°C (68°F)) | 970 | mPa s (cP) |
| Viscosity (at 30°C (86°F)) | 557 | mPa s (cP) |
| Viscosity (at 40°C (104°F)) | 307 | mPa s (cP) |
| Flash Point | min. 95 | °C |
Table 2 of 2
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Solids Content | 43.6 - 47-0 | % | PM5.020 |
