Redicote C-150AP
- Chemical Family
- Cationics, Fatty AminesCationicsFatty Amines
Redicote C-150AP is an Adhesion Promoter for chip seal (hot applied), patch mixes and emulsions. Rapid and medium-setting Cationic Emulsions most often have good adhesion to siliceous aggregates, but anionic emulsions may require the addition of adhesion promoters. Redicote C-150AP have been specially formulated for use in anionic emulsions. Redicote C-150AP is a water-soluble adhesion promoter for anionic emulsions to improve coating and adhesion to aggregate. Additive for asphalt sealers (sealcoat) to improve resistance to moisture. Redicote C-150AP is an Easy to Use: Water-soluble product can be blended into finished emulsion or sealcoat Use 0.1-0.5% basis emulsion or finished sealcoat. Product contains water and should not be added to hot asphalt.
Properties
- Physical Form
- Liquid
Product families
Applications
- Waterproofing & Weatherproofing
- Pavement Highways Roads & Bridges
Product Families
- Asphalt Additives
Other characteristics
- Brand
- Redicote
- End Uses
- Asphalt, Seal Coat, Soft Bitumen Mix
- Features
Excellent Adhesion, Low Viscosity, Moisture Resistance; Easy to use: Low viscosity, water-soluble product can be incorporated into the soap solution or preferably blended into the finished emulsion or sealcoat.; Adhesion promoter especially designed to be easily blended with emulsions.; Enhance emulsification of difficult binders and improve compatibility of SBS with bitumen.
- Functions
Adhesion Promoter, Surfactant, Surfactant (Cationic)
- Applicable Processes
- Chipseal, Surface Dressing
- Chipseal
- Surface Dressing
- Markets
- Building & Construction
- Technology
- Industrial Additives & Materials
- Packaging Type
- Bulk
- Drums
- Totes (IBC)
- Storage Condition
Redicote C-150AP may be stored in carbon steel tanks. Bulk stores should be maintained between 15-35°C (59-95°F).. Redicote C-150AP contains amines and may cause severe irritation to skin and eyes. Protective goggles and gloves must be worn when handling this product. Product contains water and should not be added to hot asphalt cement.
- Industrial Additives End Use
- Asphalt
- Seal Coat
- Soft Bitumen Mix
- Industrial Additives Features
- Excellent Adhesion
- Low Viscosity
- Moisture Resistance
- Industrial Additives Functions
- Adhesion Promoter
- Surfactant
- Surfactant (Cationic)
Technical data
Table 1 of 3
9 rows| Characteristic | Value | Unit |
|---|---|---|
| Density (at 10°C (50°F)) | 0.95 (7.96) | g/cc (lbs/U.S. gal) |
| Density (at 20°C (68°F)) | 0.95 (7.92) | g/cc (lbs/U.S. gal) |
| Density (at 30°C (86°F)) | 0.94 (7.81) | g/cc (lbs/U.S. gal) |
| Density (at 40°C (104°F)) | 0.93 (7.77) | g/cc (lbs/U.S. gal) |
| Viscosity (at 10°C (50°F)) | 200 | mPa s (cP) |
| Viscosity (at 20°C (68°F)) | 100 | mPa s (cP) |
| Viscosity (at 30°C (86°F)) | 56 | mPa s (cP) |
| Viscosity (at 40°C (104°F)) | 30 | mPa s (cP) |
| Flash Point | min. 100 | °C |
Table 2 of 3
1 row| Characteristic | Value | Unit |
|---|---|---|
| Pour Point | 10 (50) | °C(°F) |
Table 3 of 3
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Amine Value | 490 - 530 | mg KOH/g | SMA CL002 |
