Opticool™ 572(E) (EMEA Only)
Opticool™ 572(E) (EMEA Only) is a high performance blend of synthetic and emulsion technology. OPTICOOL 572(E) offers superior lubrication/cooling, corrosion inhibition, extreme pressure resistance, rancidity control and hard water stability. OPTICOOL 572(E) is ideal for multi-task machining centers. The flexible technology and additive package arsenal allows for plant standardization of multi-machining fluids.
Properties
- Physical Form
- Liquid
Product families
Applications
- Equipment & Parts
Product Families
- Metalworking Fluids
Other characteristics
- Brand
- Opticool
- Features
Corrosion Resistant, Excellent Lubricity, Extreme Pressure Performance, Good Hard Water Stability, Low Foaming, Microbe Resistant
- Application Area
Broaching Applications, Drawing Operations, Milling Operations, Reaming, Sawing Operations, Stamping, Tapping Operations, Threading Operations, Turning Operations; Broaching Applications; Drawing Operations; Milling Operations; Reaming; Sawing Operations; Stamping; Tapping Operations; Threading Operations; Turning Operations
- Markets
- Industrial
- Clean Up
Residual Coolant on parts, equipment and machine tools is easily removed by rinsing with water.
- Appearance
- Clear, amber
- Direction
OPTICOOL 572(E) should be added to water at the recommended starting point. It is important that the coolant be added to water. Do not add water to the coolant. Before adding OPTICOOL 572(E) to any reservoir remove old coolant, fines and residues from the system. Drain the old coolant from the sump; charge the system with Chesterton's 218(E) HDP Cleaner at 5% concentration. Circulate the cleaner for up to 2 hours through all lines, tool holders and work pieces. Dilutions in excess of 25:1 are not recommended since the corrosion protection and resistance to bacterial attack will be reduced.
- Properties
- Excellent Lubrication/Cooling Properties
- Excellent Foam Control
- Clean, Safe Work Environment
- Superior Heat Dissipation
- Extreme Pressure Capability
- Excellent Hard Water Stability
- Reduces Mist and Inhalation Hazards
- Resists Microbial Attack
- Soluble In
- Water
- Composition
OPTICOOL 572(E) blends synthetic and micro-emulsion technology to offer maximum lubrication and cooling properties. The water/oil soluble additive package extends sump life and offers excellent foam control. These additives along with the base lubricant provide both hydrodynamic (barrier film) and boundary lubrication which effectively extend tool life and result in superior surface finish. OPTICOOL 572(E) does not contain nitrites, phenols, sulfur, mercurials, formaldehyde or chlorinated additives.
- Product Type
- Metalworking Fluids
- Technology
- Ready-to-Use Products
- Base Oil
- Synthetic Oil
- Suggested Uses
- Milling
- Drawing
- Sawing
- Turning
- Broaching
- Tapping
- Grinding
- Drilling
- Waste Disposal
Primary treatment by an oil separation or settling tank will remove solids and tramp oil. At this point, it is possible that adjustments to the concentration could be made and the coolant may be reclaimed for continued use.
- Labeling Claims
- Formaldehyde-free
- Nitrite-free
- Non-Phenolic
- Sulfur-free
Technical data
Table 1 of 1
7 rows| Characteristic | Value | Unit |
|---|---|---|
| Base Fluid | Semi Synthetic | — |
| Flash Point | None | °C |
| Freeze Thaw Stability | Pass | — |
| pH (10% Concentration) | 9.2 | — |
| pH Concentrate | 9.2-9.4 | — |
| Refractometer Factor (per °Brix) | 1.6 | % |
| Specific Gravity | 1.04 | — |
