HELMIBOND 6503
- Chemical Family
- Acrylics & Acrylates
HELMIBOND 6503 is a solvent-free, acrylic adhesive formulated to permanently install luxury vinyl tile and plank flooring, resilient sheet vinyl flooring, rubber tile flooring and rubber sheet flooring and rubber and vinyl stair treads. To insure product stability and reduce joint openings, HELMIBOND 6503 has been formulated to produce a hard set and firm bond line less susceptible to indentation and telegraphing. May be used over properly prepared porous and non-porous surfaces such as concrete, underlayment grade plywood, cementitious based patching compounds and levelers.
Other characteristics
- Brand
- HELMIBOND
- Product Type
- Adhesive, Contact Adhesive
- Application Area
- Floor
- Compatible Substrates & Surfaces
- Concrete, Wood
- Markets
- Building & Construction
- Benefits
Fast reacting; Non-Flammable; Solvent-free; Excellent moisture and alkali resistance; Excellent plasticizer resistance; When dry, does not promote growth of mold or mildew; Low odor; Easy to trowel; Excellent indentation resistance; Sets to a flexible, permanent bond; FloorScore® Certified; LEED Points Contribution and LEED Points; MR Credit Regional Materials up to 2 points; IEQ Credit 4.1 Low-Emitting; Materials Adhesives and Sealants 1 point
- Clean Up
Remove wet adhesive immediately with a clean cloth dampened with mineral spirits, isopropanol or acetone. Cured adhesive is very difficult to remove. Do not apply solvents directly to flooring. Use caution when handling flammable solvents.
- Packaging
HELMIBOND 6503 is available in 1-gallon and 4-gallon pails.
- Shelf LIfe
- 18 months in unopened properly stored containers
- Acclimation
The area to receive flooring shall be fully enclosed, weather tight, with an installed operating HVAC system. The installation area, flooring materials and adhesive must be acclimated at a temperature between 65°– 85°F for 48 hours prior to, during and after installation. The relative humidity of the installation area shall be maintained between 35 – 55% per ASTM F710 (Standard Practice for Preparing Concrete Floors to Receive Resilient Flooring)
Technical data
Table 1 of 1
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| VOC | max. 1 | grams/liter | SCAQMD Rule1168 |
