To catalogue
Alteo SH60
- CAS Number
- 21645-51-2
- EC Number
- 244-492-7
- Chemical Name
- Alumina Trihydrate (ATH), Calcium Metasilicate
Alteo SH60 is used in a wide variety of applications and polymer systems which consists of low fines content and a very well defined topcut. It is available from from 25 to 4 microns.
Identification
- CASE Ingredients Features
- Flame RetardantHigh Tensile Strength
- CASE Ingredients Functions
- Filler
Product families
Applications
Applications
- Adhesives & Sealants — Other Adhesives & Sealants Applications; Paints & Coatings — Other Paints & Coatings Applications
Paints & Coatings — Building & Construction
- Floor Coatings
Building & Construction — Flooring & Surfaces
- Floor Coatings
Electrical & Electronics — Parts & Components
- Other Parts & Components
Product Families
CASE Ingredients — Additives
- Fillers & Extenders
Other characteristics
- End Uses
Epoxy Coating, Gelcoat, Plastisol Coating, Powder Coating, Varnishes, Waterborne Coating
- Functions
- Filler
- Oil Absorption
- 28.83 - 28.83 g/100 g
- Compatible Polymers & Resins
Cement, Epoxies (EP), Polyamides, Polyesters, Polyethylenes (PE), Polyurethanes (PU), Polyvinyl Chloride (PVC)
- Markets
- Adhesives & Sealants
- Building & Construction
- Electrical & Electronics
- Paints & Coatings
- Application
- Polyester Resins
- Gel coat
- PVC
- PVC - Plastisols
- Flooring
- Epoxy Resin
- Electronic parts-Casting resins
- Laminates
- Coating Type
- Epoxy Coating
- Gelcoat
- Plastisol Coating
- Powder Coating
- Varnishes
- Waterborne Coating
- Technology
- CASE Ingredients
- Labeling Claims
- Halogen-free
- Certifications and Compliance
- FDA 21 CFR 174.5
- FDA 21 CFR 177.2600
- ISO 14001
- ISO 45001
- ISO 50001
- ISO 9001
- Compatible Polymers and Resins
- Cement
- Epoxies (EP)
- Polyamides
- Polyesters
- Polyethylenes (PE)
- Polyurethanes (PU)
- Polyvinyl Chloride (PVC)
Technical data
Table 1 of 2
3 rows| Characteristic | Value | Unit |
|---|---|---|
| Moisture Content | 0.5 | % |
| Oil Absorption (Oleic Acid) | 31.0 | ml/100g |
| Specific Surface Area (B.E.T) | 5.0 | m2/g |
Table 2 of 2
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Aluminium Hydroxide Content (By Difference) | 99.7 | % |
| Calcium Oxide Content | 100.0 | ppm |
| Iron Oxide Content | 80.0 | ppm |
| Loss On Ignition (100-1000°C) | 34.6 | % |
| Silicon Dioxide Content | 65.0 | ppm |
| Sodium Oxide Content Total | 2300.0 | ppm |
