Auburn Manufacturing Co. PDF HT-800 Medium Silicone Foam

Chemical Family: Silicones

Auburn Manufacturing Co. PDF HT-800 Medium Silicone Foam is a highly versatile, medium firmness silicone that offers the lightness of a foam along with the enhanced sealing capabilities of a traditional sponge rubber. It is used to seal or protect various outdoor communication, electronics, or lighting enclosures, while providing protection against wind-driven rain or fire. The material is also used to reduce shock or isolate vibration. Auburn silicone foams are available in various thicknesses and manufactured in roll form which can be easily converted into tapes, sheets or custom die cut gaskets.

Properties

Physical Form: Foam

Product families

Building & Construction — Building Materials

Interior Fixtures

Industrial — Chemical & Industrial Manufacturing

Equipment & Parts

Electrical & Electronics — Parts & Components

Housings & Enclosures

Other characteristics

Density: 352.0 - 352.0 kg/m³, 352.55 - 352.55 kg/m³
End Uses: Electronic Cabinets, Gaskets, HVAC Ducts, Lighting Fixtures, Seals, Shock Absorbing Pads; Electronic Cabinets; Gaskets; HVAC Ducts; Lighting Fixtures; Seals; Shock Absorbing Pads
Foam Type: Memory Foam
Color: Black
Grey
Red
Markets: Building & Construction
Electrical & Electronics
Industrial
Flame Rating: UL 94 HF1
UL 94 V0
Product Type: Foam
Technology: Ready-to-Use Products
Packaging Type: Rolls
Product Families: Ready-to-Use Products — Foams
Technical Details: Tolerance (Inches)
Tolerance (with PSA)
Usage: Environmental seals to protect against penetration of dust, moisture, air, or light into outdoor enclosures such as lighting fixtures, HVAC units or electronic cabinets.; Vibration isolators in electronic components or transportation vehicles.; Shock absorbing cushions, pads or gaskets.
Benefits and Features: Excellent memory and low stress relaxation reduces maintenance costs associated with gasket failures due to compression set and softening.; Resistance to ultraviolet light, ozone, extreme temperatures and flame enables Auburn silicone foams to perform consistently in all environments.; Compact cell structure and unique formulation provides enhanced sealing performance with resistance to penetration of fine particles or winddriven rain.; Available in roll goods, slit tapes or custom die cut parts. All Auburn silicone foams are available either plain or with an adhesive backing applied to one or both surfaces.
Certifications and Compliance: UL 94
Ready to Use Product Features: Conformable
Cost Effective
Excellent Seal Properties
Good Tear Strength
High Durability
High Temperature Resistance
High Tensile Strength
Highly Versatile

Technical data

Table 1 of 6

4 rows

Characteristic	Value	Unit	Method
Water Absorption (Internal, 24 hrs at Room Temperature)	1.4	%	—
UV Resistance	No Degradation	—	SAE J -1960
Ozone Effect Rating	0 (No Cracks)	—	ASTM D 1171
Corrosion Resistance	Pass	—	AMS 3568

Table 2 of 6

7 rows

Characteristic	Value	Unit	Method
Thickness	0.8 - 12.7	mm	—
Standard Width	914.0	mm	—
Density (Force Measuredat 25% Deflection)	22.0	Ib/ft³	ASTM D 1056
Compression Force Deflection (70°C)	9.0	psi	ASTM D 1056- Test D
Compression Set, Typical ( 100°C)	max. 1	%	ASTM D 1056 Test D
Tensile Stength	45.0	psi	ASTM D 412
Elongation	80.0	%	ASTM D 412

Table 3 of 6

2 rows

Characteristic	Value	Method
Smoke Density (4.0 minutes)	max. 50	ASTM E 662
Toxic Gas Emissions Rating	Pass	SMP-800C & BSS 7239

Table 4 of 6

3 rows

Characteristic	Value	Unit	Method
Low Temperature Filex (55°C)	Pass	—	ASTM D 1056
Recommended Use Temperature	55 - 200	°C	SAE J-2236
Recommended Intermittent High Temperature Use	250.0	°C	Internal

Table 5 of 6