Xypex Admix C-2000
Admix C-2000 is added to the concrete mix at the time of batching. Admix C-2000 consists of Portland cement and various active, proprietary chemicals. These active chemicals react with the moisture in fresh concrete and with the by-products of cement hydration to cause a catalytic reaction. This reaction generates a non-soluble crystalline formation throughout the pores and capillary tracts of the concrete that permanently seals the concrete and prevents the penetration of water and other liquids from any direction.
Other characteristics
- Features
Chemical Resistant, Cost Effective, Crystalline, High Strength, Hydrostatic Strength, Non-Toxic, Waterproofing
- Color
- Grey
- Markets
- Building & Construction
- Storage
Xypex products must be stored dry at a minimum temperature of 45ºF (7ºC). Shelf life is one year when stored under proper conditions.
- PACKAGING
Admix C-2000 is packaged in convenient sizes of various types of packaging, including repulpable paper bags and soluble bags. Contact your local Xypex Technical Services Representative or dealer for details and availability.
- Appearance
- Light grey powder
- Advantages
Resists extreme hydrostatic pressure; Becomes an integral part of the substrate; Highly resistant to aggressive and chemical environments; Can seal static hairline cracks up to 0.4 mm; Allows concrete to breathe; Non-toxic; No VOCs; Less costly to install than most other methods; Permanent; Added to the concrete at time of batching and therefore is not subject to climatic restraints; Increases flexibility in construction scheduling
- Limitations
When incorporating Xypex Admix, the temperature of the concrete mix should be above 40ºF (4ºC).
- Dosage Rate
Xypex Admix C-2000 (Regular Grade): 2% by weight of cement
- Technology
- Ready-to-Use Products
- Certification
Admix C-2000 is certified as a water retaining admixture according to EN 934-2+A1. The certification of the product and regular audits of the FPC are carried out by Notified Body 1020 TZUS (060-051352).
- Labeling Claims
- Non-Toxic
- VOC-free
- Recommended
- Reservoirs
- Sewage and Water Treatment Plants
- Secondary Containment Structures
- Tunnels and Subway Systems
- Underground Vaults
- Foundations / Basements
- Parking Structures
- Swimming Pools
Technical data
Table 1 of 1
3 rows| Characteristic | Value | Unit |
|---|---|---|
| Chloride Content | max. 0.1 | % |
| pH | 12.0 - 12.4 | — |
| VOC | none | — |
