To catalogue
UNIFOAM® XPE 45
- Chemical Family
- Polyethylenes, PolyolefinsPolyethylenesPolyolefins
UNIFOAM® XPE 45 is made from high-quality polyethylene polymer and additives.
Other characteristics
- Brand
- UNIFOAM
- Density
- 39.0 - 51.0 kg/m³
- End Uses
Acoustic Barrier, Aerospace Applications, Appliances, HVAC Insulation, Marine Applications, Medical Applications; Acoustic Barrier; Aerospace Applications; Appliances; HVAC Insulation; Marine Applications; Medical Applications
- Foam Type
- Closed Cell Foam
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Healthcare & Pharma
- Industrial
- Printing & Packaging
- Features
- Very good thermo-forming
- Low water absorption properties
- Very good thermal insulating capabilities
- Highly energy absorbent
- Low water vapor transmission
- Good weathering
- Generally chemically inert
- Availability
It can be supplied in a range of colors including black, white, gray, anthracite, blue, green, yellow, and red.; Special colors can be produced on request provided the quantity required is acceptable.; Flame retardant and antistatic grades can also be supplied.
- Product Type
- Foam
- Technology
- Ready-to-Use Products
- Labeling Claims
- Recyclable
- Sustainable
- Product Families
- Ready-to-Use Products — Foams
- Quality Standards
- FMVSS 302
- Environmental Awareness
UNIFOAM® XPE 45 is non-toxic and manufactured without CFC's or other substances which may harm the ozone as mentioned in the Montreal Protocol.
Technical data
Table 1 of 1
16 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 39 - 51 | kg/m³ | ISO 845 |
| Tensile Strength | min. 240 | kPa | ISO 1798 |
| Tensile Elongation | min. 120 | % | ISO 1798 |
| Compressive Strength (Deflection 10%) | min. 60 | kPa | ISO3386/1 |
| Compressive Strength (Deflection 25%) | min. 76 | kPa | ISO3386/1 |
| Compressive Strength (Deflection 50%) | min. 142 | kPa | ISO3386/1 |
| Compression Set (22h Charge, 23°C, Deflection 25%, 0.5h After Discharge) | max. 12 | % | ISO1856 |
| Compression Set (22h Charge, 23°C, Deflection 25%, 24h After Discharge) | max. 5 | % | ISO1856 |
| Thermal Conductivity (10°C) | 0.038 | W/mK | DIN52612 |
| Thermal Conductivity (40°C) | 0.041 | W/mK | DIN52612 |
| Working Temperature Range | -80 to 90 | °C | ISO 2796 |
| Dimensional Stability | max. 5 | % | ISO 2796 |
