IKAMOD 135A
IKAMOD 135A is a synthetic material, kind of thermoplastic elastomer, made from high density polyethylene (HDPE) and chlorine. This chlorinated polyethylene (CPE) material is designed as an additive to improve the mechanical properties of opaque rigid PVC, suitable for both indoor and outdoor applications. It has very good mechanical properties (elongation at break, tensile strength) and very good toughness.
Properties
- Physical Form
- Powder
- Solid
Product families
Applications
- Pipes & Hoses
- Glazing & Window Elements
- Fence Decks & Rails
- Siding & Trim
Product Families
- Performance Additives
Other characteristics
- Brand
- IKAMOD
- End Uses
- Cup Holders, Pipes, Siding Applications
- Functions
- Impact Modifier
- Compatible Polymers & Resins
- Polyvinyl Chloride (PVC)
- Color
- White
- Markets
- Agriculture & Feed
- Building & Construction
- Storage
Store in its original packaging, in a cool and dry environment.; Avoid contact with moisture.; Do not store it near heat sources.
- PACKAGING
- IKAMOD 135A can be supplied as follows:
- 25 kg bag.
- 550 kg big bag.
- Appearance
- White Powder
- Shelf LIfe
- 2 Years
- Technology
- Plastics
- Packaging Type
- Bags
- Quality Control
IKA Innovative Kunststoffaufbereitung GmbH & Co.KG Company is fully certified to international standards ISO 9001 and ISO 14001. ISO certificates (DIN EN ISO 9001:2015 and DIN EN ISO 14001: 2015) can be supplied upon request.
- Benefits
- Very good mechanical properties.
- Very good toughness.
- Good impact resistance.
- Good chemical resistance
- Very good welding performance.
- Material Features
- Chemical Resistant
- Good Impact Strength
- Good Mechanical Properties
- Good Toughness
- High Efficiency
- High Elongation
- High Impact Performance
- High Rigidity
- Applications
This CPE additive is widely used in many different U-PVC applications, such as window profiles and fences, technical profiles, siding, pipes.
- Certifications and Compliance
- ISO 14001
- ISO 9001
- Compatible Polymers and Resins
- Polyvinyl Chloride (PVC)
- Plastics and Elastomers End Uses
- Cup Holders
- Pipes
- Siding Applications
- Plastics and Elastomers Functions
- Impact Modifier
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Bulk Density | 0.50±0.10 | g/cm3 | GB/T 1636-2008 |
| Chlorine Content | 35.0±2.0 | % | GB/T 7139 |
| Elongation at Break | 800±50 | % | GB/T 528-2009 |
| Sieve Residue (30 mesh) | max. 2 | % | GB/T 2916 |
| Tensile Strength | min. 8.0 | MPa | GB/T 528-2009 |
| Volatile Content | max. 0.40 | % | ASTM D5668 |
