To catalogue

WSD Chemical Dioctyl adipate/DOA Super Grade

CAS Number
103-23-1
EC Number
203-090-1
Chemical Name
Bis(2-ethylhexyl) Adipate

WSD Chemical Dioctyl adipate/DOA Super Grade is a typical cold resisting plasticizer for vinyl chloride polymer and its copolymer, polystyrene,cellulosic resins and synthetic rubbers. It imparts a high plasticizing efficiency,less color change during light and heat attack,good softening property at low temperature.Usually applied in cold-resisting agricultural film,artificial leather,wrapping layer for electric wires,and water tubes for outdoor use.

Properties

Physical Form
Liquid

Product families

Applications

Applications
  • Consumer Goods — Luggage & Leather Goods
Agriculture & Feed — Agricultural Films
  • Other Agricultural Films
Building & Construction — Building Materials
  • Pipes & Plumbing
Electrical & Electronics — Wire & Cable
  • Jacketing & Insulation

Product Families

Elastomers — Elastomer Additives
  • Performance Additives
Plastics — Polymer Additives
  • Performance Additives

Other characteristics

End Uses

Agricultural Applications, Cables, Film, Synthetic Leather, Tubes, Wires

Synonyms

Adipic acid diester with 2-ethylhexanol, Di(2-ethylhexyl) adipate, Diethylhexyl adipate, Dioctyl adipate, DOA, NSC 56775

Functions
Plasticizer
Compatible Polymers & Resins

Cellulose & Cellulosics, Polystyrenes (PS), Polyvinyl Chloride (PVC)

Markets
  • Agriculture & Feed
  • Building & Construction
  • Consumer Goods
  • Electrical & Electronics
Technology
  • Elastomers
  • Plastics
Packaging Type
Drums
ChemicalFormula
C22H42O4
Material Features
  • Good Softening Point
  • High Efficiency
Packaging and Storage

Packed in 200 liter galvanized iron drum, net weight 180 kg/drum.. Stored at dry,shady,ventilated place. Prevented from collision and sunrays,rain-attack during handling and shipping.

Compatible Polymers and Resins
  • Cellulose & Cellulosics
  • Polystyrenes (PS)
  • Polyvinyl Chloride (PVC)
Plastics and Elastomers End Uses
  • Agricultural Applications
  • Cables
  • Film
  • Synthetic Leather
  • Tubes
  • Wires
Plastics and Elastomers Functions
Plasticizer

Technical data

Table 1 of 1

10 rows
CharacteristicValueUnit
Boiling Point (3mm Hg)215°C
Density (20°C)0.924 - 0.930g/cm3
Refractive Index (25°C)1.447—
Viscosity (25°C)12~15cP
Weight-loss on Heatingmax. 0.2%
Ester Contentmin. 99%
Flash Pointmin. 192°C
Molecular Weight370.57—
Acidity (Calculated as Phthalic Acid)max. 0.012%
Colourity (Pt-Co)max. 25—

The Omnichem website uses cookies. By continuing to use the site, you consent to their use in accordance with our Privacy Policy and to the collection of analytics.