TBA Protective SolutionsTBA Protective Solutions ECP 9905
ECP 9905 is Conductive Glass Fiber Filled Polyphenylene Sulfide Carbon Nanotube Compound Injection Molding proprietary TBA ECP injection molding compound utilizing multi wall carbon nanotube technology to give a permanently conductive material. Special compounding techniques at low filler loadings ensure the retention of physical properties and excellent cleanliness. ECP 9905 is a very high performance thermoplastic with a very high modulus and strength plus a very high continuous service temperature (240°C, short term exposure up to 270°C). It is inherently flame retardant (UL 94 V0), has very good chemical and oxidation resistance, very low water absorption and very low creep, even at elevated temperatures.
Polymer Name:
- Polyphenylene Sulfide (PPS)
Fillers Included:
- Carbon Nanotube, Glass Fiber
- Carbon Nanotube
- Glass Fiber
Flexural Modulus:
- 13700.0 - 13700.0 MPa
Processing Methods:
- Injection Molding
Markets:
- Automotive & Transportation
- Electrical & Electronics
Flame Rating:
- UL 94 V0
Technology:
- Plastics
Chemical Family:
- Polyphenylene Sulfide (PPS)
Material Features:
- Chemical Resistant
- Cleanable
- Conductive
- Dimensional Stability
- Excellent Mineral Filler Loading Capability
- Flame Retardant
- Good Stress Strain Performance
- High Modulus
- High Strength
- Improves Physical Properties
- Low Creep
- Low Water Absorption
- Oxidation Resistant
- Wide Temperature Operating Range
Certifications and Compliance:
- UL 94
Plastics and Elastomers End Uses:
- Aerospace Applications
- Automotive Fuel Lines
- Housings
- Water Pumps
Product Families
Plastics — Engineering & Specialty Polymers
- High Performance Thermoplastics
| Characteristic name | Value | Unit of measurement | Test method |
| EMI Shielding (at 100MHz/1GHz) | 34 | dB | Reflectometer |
| Flexural Modulus (at 2mm/min) | 13.7 | Gpa | ISO 178:2003 |
| Heat Deflection Temperature (at 1.8 MPa) | min. 260 | °C | BS EN ISO 75-1&2 |
| Izod Impact Strength (at 23 ± 2°C) | 5 | KJ/m² | ISO179-1:2001 |
| Specific Gravity | 1.64 | g/cm³ | BS EN ISO 1183-1:2004 |
| Tensile Modulus (at 1mm/min) | 11.8 | Gpa | ISO 527-2:1997 |
| Tensile Strain (at Break, 50mm/min) | 1.6 | % | ISO 527-2:1997 |
| Tensile Strength (at Break, 50mm/min) | 166 | MPa | ISO 527-2:1997 |
| Volume Resistance (at 23 ± 2°C) | 8.5x10⁶ | Ohm.cm | BS 2044:1984 /3 |
